Capture guide

How to capture footage that just works

Need help organizing your files? Prepare with your AI (opens in a new tab) — read and copy a prompt for your local assistant.

Learn common capture problems and practical ways to improve your next pass. Start with coverage, sharp frames and connected viewpoints; no single setting guarantees a successful reconstruction.

Capture for 3D: coverage first, composition later — plan the visit, use overlapping viewpoints, and bridge doorways and corners.

Updated November 18, 2026

Bring your 360° capture

Twinbly accepts raw Insta360 .insv files and stitched 2:1 equirectangular MP4 video. For an exported video, keep the full 360° sphere. A reframed flat video or an unstitched dual-fisheye image is a different input.

  • Move through the space with steady forward motion. A 360° camera sees around you, but reconstruction still needs different viewpoints.
  • For Insta360 Studio exports, choose full 360° video rather than a reframed view.
  • If your browser cannot preview an 8K export, try a 5.7K export. Review the processing estimate before starting.
  • For other 360° cameras, the stitched export format matters. Native DJI and Antigravity files are not currently listed as supported inputs.
Insta360 Studio export guide

Insta360 X5 to Gaussian splats: files, capture, preview and sharing

Video lesson coming soon

We're filming a start-to-finish capture — the plan, the walk, the upload, the result. The four habits below are a useful starting point.

The four rules

Use these four habits to give the reconstruction useful source material:

  1. 1Walk around, don't spin. Your feet move; the subject stays in frame.
  2. 2Pick something with detail. Texture, edges, patterns. Not blank walls.
  3. 3Slow and steady. A smooth 30-second pass beats a shaky 10-second one.
  4. 4See every angle. Connect different viewpoints with generous overlap.

When captures don't pass

Twinbly runs a quality check before training so you don't waste time or money on a fuzzy result. If we hold your capture back, it's almost always one of these reasons — each one tells you exactly how to try again.

Camera rotated in one spot

Clip coming soon
What's happening

You spun the phone around while standing still, instead of walking around the subject. The most common cause of 'few sparse points.'

Why it matters

3D reconstruction needs PARALLAX — the camera has to see the subject from different physical positions, like your two eyes seeing the world from slightly different points. Rotating in place gives the system the same view at different angles, which it can't triangulate into 3D.

How to fix it
  • ·Walk slowly AROUND the subject — your feet should move, not just your wrists.
  • ·For an object on a table: take a step every couple seconds, keeping the subject in the middle of the frame.
  • ·For a room: walk a loop or zigzag through it, not just turn from a fixed spot.
  • ·If you can only stand in one place, that's a panorama, not a splat. Splats need translation.

Not enough visible detail

Clip coming soon
What's happening

Blank walls, smooth floors, solid colors, ceilings, sky. The matcher needs distinctive features (corners, edges, patterns) to lock onto.

Why it matters

Every frame gets analyzed for ~hundreds of distinctive points the system can re-find in adjacent frames. Featureless surfaces give it nothing to chain together, so it ends up with too few matches to recover 3D positions.

How to fix it
  • ·Pick subjects with visible texture — wood grain, fabric folds, bricks, foliage, surface patterns.
  • ·Avoid filling the frame with one solid color (a plain wall, a sky-only shot, a white ceiling).
  • ·If the subject itself is smooth, make sure the background or surroundings give the matcher something to lock onto.
  • ·Glossy / glassy subjects are a separate problem — see below.

Camera moved too fast

Clip coming soon
What's happening

Blurry frames from quick pans, shaky hands, or low-light captures with slow shutter speeds.

Why it matters

Motion blur smears the fine details the system uses to identify each frame uniquely. A blurred edge looks like a different shape than the same edge sharp, so the matcher can't chain them together.

How to fix it
  • ·Slow the camera pass and check individual frames for motion blur, especially during turns.
  • ·Hold the device with both hands and brace against your body, a wall, or anything stable.
  • ·Avoid low light — your phone drops shutter speed and motion blur gets worse fast.
  • ·If you have a gimbal, use it.

Glass, mirrors, glossy surfaces

Clip coming soon
What's happening

Reflective surfaces confuse the matcher. The reflection in a mirror or a glossy car panel moves when the camera moves, so it looks like a 3D point that doesn't actually exist.

Why it matters

Standard reconstruction assumes every visible feature is a real 3D point at a fixed location. Reflections break that assumption — the matcher tries to triangulate them and gets garbage 3D positions, which then poison the rest of the solution.

How to fix it
  • ·Reflections remain difficult. Include stable, textured surroundings and inspect the result instead of relying on a processing setting to fix them.
  • ·Shoot under soft, diffuse light — direct sunlight or harsh overhead lights make every glossy edge a tiny mirror.
  • ·For real mirrors: cover them, or pick a different angle that excludes them.
  • ·Polarizing filters help on phones that support them.

Capture didn't see the whole subject

Clip coming soon
What's happening

You only covered part of the subject — one side, one angle, half a room. The system needs overlapping views from multiple angles to reconstruct complete geometry.

Why it matters

Overlapping views help the reconstruction place surfaces in space. Areas seen from too few useful viewpoints can look weak or disappear when a visitor moves around them.

How to fix it
  • ·Make a complete loop around the subject.
  • ·Keep the subject in frame the whole time — don't aim the camera at the ground or sky between angles.
  • ·Keep generous overlap across several successive views. Carry recognizable features through turns and doorway transitions.
  • ·Add higher, lower or closer passes where they reveal surfaces the first pass could not see. A fixed frame count does not guarantee coverage.

Ready to try again?

Head back to your dashboard and upload new footage. The analyzer will preview your capture and flag issues before you commit to processing.

Start a new capture